Search
suomi
Login
ALS Solutions provides you with online access to your sample and analytical information from anywhere.
Login
Retrieve results and track sample progress in real time with access to featured digital products such as CoreViewer™ and ALS QCPro™.
Login
This convenient application lets customers closely track oil analysis reports in process in real time.
LoginImpurity removal is a well-established technology that is used for purification and concentration of base metals in aqueous solutions (e.g. nickel, cobalt copper, and zinc). The technology is robust and dependent on controlled precipitation of metal ions in solution typically through pH adjustments and reagent dosing. ALS offers a full range of impurity removal testwork and piloting services covering basic scoping tests, typically conducted at the bench scale, through to continuous piloting for definitive feasibility studies.
ALS has created and invested in a 'state of the art' Hydrometallurgical Centre of Excellence (HCE) and has a world class service capability to investigate impurity removal in all flowsheet configurations.
Hydrometallurgy is typically the process of leaching metals from ore concentrates into aqueous solutions followed by various impurity removal and concentration processes to purify and then recover these metals into their finished products. In order to offer this wide range of process optimization capability, ALS has invested a significant amount into new specialized plant and equipment to meet the demands for current flowsheet development challenges, especially around the emerging EV metals markets.
Batch equipment includes a range of temperature controlled agitated tanks with controlled gas sparging and reagent additions to controlled pH and ORP conditions.
Almost all base metals (Cu, Zn, Ni and Co) include iron as one of the many possible impurities. In addition to the iron-base metal associations, the concentration methods (mostly flotation) that are used to produce the various base metal concentrates are not perfect. Very common contaminants of these concentrates are iron sulphides, such as pyrite (FeS2 ) and pyrrhotite (FeS). The production of pure metals from typical base metal concentrates will therefore require one or more steps of selective iron removal.
The acid leaching of nickel laterites for example takes advantage of the leaching conditions (up to 250°C) that favour iron hydrolysis to rapidly precipitate the iron and release acid during the leach. The low temperature atmospheric tank leaching processes on the other hand operate under conditions that do not favour iron hydrolysis during the leach. Thus, efforts must then be made downstream to handle the relatively concentrated iron solutions.
In another example, the hydrometallurgical treatment of copper uses the selectivity in solvent extractants for copper over iron.
In some basic circuits the solubility of metal ions in acidic solutions can be controlled by simple reagent additions (neutralisation) using either Limestone or Lime additions under controlled pH and reagent addition regimes. The use of oxygen as an oxidant or Ferric are common together with reductants such as SO2 /air or SMBS for the control of ORP and precipitation chemistry.
For battery metals impurity removal has required the use of IX and crystallisation to meet the high purity specifications necessary for LiOH and PECAM production for 811 NCM.
Hydrometallurgical testwork is always complex, and so we are happy to help walk you through the process, or meet your requirements exactly.
Please contact us for further details.
Generally, no. Insurance and safety protocols typically prevent renting laboratory space and this is not part of ALS’s business model. Clients are able to visit and witness testwork but this is to observe only! Typically, clients may attend on 24/7 piloting campaigns and interact with senior staff members for Technical interactions.
Yes, Vendors and SX reagent suppliers often attend during specific bench and pilot scale testwork periods to conduct offline tests.
Yes, clients are always welcome to visit our facilities and observe samples or tests in progress. Inductions are required and other rules may apply to visitors.
Yes, if a testwork program is in progress, ALS will happily dispatch testwork products and feed samples to vendors, third party laboratories, and customers as required. Fees apply.
Yes, Generally piloting testwork follows a successful bench testwork program where the proposed process flowsheet has been selected. Continuous testwork will prove the viability of the selected flowsheet and confirm recycle streams and overall circuit kinetics which is not possible from only batch or bench scale tests.
No, as it is not our core business and would put us in direct competition with many of our clients. We can, however, put you in contact with a range of reputable engineering providers and consultants.
Impurity Removal rarely happens in isolation and typically many other processes are inter-related, leaching, CCD, filtration, recycles, electrowinning etc.
Click on the above links or contact us for further information. We can integrate a full program for you if required.
