• search navSearch
  • français
  • Login
Take the next step.

Request a quote for our quality-assured services, and we will get back to you within the next few business days.

    • Request a quote

Get in touch with us.

Have questions about our services? Please send us a message and we will get in touch with you soon.

CONTACT US

Sample preparation

Sample preparation quality

Each sample preparation step requires controls to be in place; from sample submittal, through preparation and return or disposal of samples. Generating a homogeneous sample that adequately represents the material from which it was taken is the goal of all sample preparation. This requires strict control on the particle size at each step of the process, accompanied by representative sub-sampling and splitting.

Calidad de preparación de las muestras

The ALS difference

ALS routinely carries out internal quality control verifications at each sample size reduction stage to ensure that each step meets the size requirements specified by the client’s method choice. This information is essential to ensure high quality sample preparation, and all QC data generated through these verifications is available through Webtrieve™ for routine monitoring.

preparación de muestras: la diferenciación de ALS

Sample submission

Confidence and security in the chain of custody for your samples as they pass through our system is paramount, and a cornerstone of ALS Geochemistry’s proprietary global laboratory management system. Samples are given a barcode and logged into our laboratory information management system on receipt and tracked through all processes. Our LIMS accommodates all major barcode formats, and we encourage clients to barcode samples prior to sending them to our laboratories.

Access to barcode tickets

Barcode ticket books can be purchased from ALS if required.

LEARN MORE

Sample storage

Materials submitted for analysis are retained free of charge at ALS laboratories for a limited time, starting from the day the final Certificate of Analysis is issued. Reasonable monthly charges apply to samples archived for longer periods in our facilities.

Secure sample storage

ALS sample storage facilities provide a secure and organised environment protected from the elements, and all archive locations are included in the laboratory tracking system.

LEARN MORE

Specific gravity & bulk density

Specific gravity and bulk density of ores are important parameters that are often under-characterised in deposits. The specific gravity of rock is a key parameter for grade and tonnage estimates for deposits. Insufficient or incorrect specific gravity or bulk density estimates can have major economic impacts for companies which makes a quality routine measurement a necessity.

The challenge of weathered rock

Field based estimates of specific gravity often use the water immersion method used for rock samples at the lab. This can be problematic when samples are highly weathered, as immersion will result in the sample disintegrating. Consequently, this can drive a sampling bias from the field technicians responsible for specific gravity measurement, as more solid rock intervals are easier to handle and more likely to be chosen. By submitting samples for specific gravity to an ALS laboratory this sampling bias is removed, and a more representative characterisation achieved.

LEARN MORE

Rock preparation

The rock preparation packages offered by ALS are ideal for outcrop, drill core and drill chip samples. These packages represent the most commonly used combinations of crushing size and pulverisation volume, however customisable variations are available to suit all projects.

Choosing a preparation method

The choice of sample preparation methods will depend on the unique mineralogy and texture of a deposit’s rocks. For this reason, there is no single package that will suit all rock types and deposits. Some preliminary test work is recommended to identify the sample preparation steps that will produce a representative sample for deposit characterisation.

LEARN MORE

Individual preparation procedures

Individual procedures can be used either separately or combined to meet specific needs required for sample size and composition. Most preparation methods are charged at a rate that is based on sample weight.

Customised sample preparation

ALS offers a range of preparation procedures for each step to allow a fully customisable protocol to suit all sample types.

LEARN MORE

Soil & sediment preparation

Drying temperatures for soil and sediment samples are typically kept low (<60ᵒC/140ᵒF) to avoid the loss of mercury and other volatile elements that may be important to interpretation. Samples can be pulverised or sieved to a specified mesh size to remove larger gains, often quartz and lithic fragments. The most common mesh size used is -180 microns, however many other screen sizes are available. If requested, all fractions generated by screening are retained and weights of each fraction can be reported as required.

Clay-sized particle separation

The clay-sized fraction in soils and sediments have been shown to provide the most reproducible precious metal values in regional geochemical surveys. Reproducibility or precision is a key requirement for data to be a reliable geochemical exploration tool. Clay separation may require pre-drying and screening (-180 or -106 micron) before the clay separation procedure can be performed. Please contact ALS to discuss options.

LEARN MORE

Miscellaneous procedures

Some procedures may be used when specialised preparation or sample compositing is required. Specialised preparation includes the use of additional washes during preparation, homogenisation, and re-bagging of samples. An hourly labour charge may apply to time-intensive projects.

What are washes?

A preparation wash is the term used when barren material, i.e. a rock that doesn’t contain any economic elements, is prepared between regular samples. These are inserted as a routine part of the ALS procedure at the beginning of each batch, but they can also be added on request after highly mineralised intervals, and are a good way of reducing the potential effect of carry-over between successive samples.

LEARN MORE

Frequently asked questions

Downloads

pdf

ALS Sample Preparation Quality Control Technical Note

21 JUL 2022

Related resources

Analyse pXRF sur échantillons préparés

Une analyse portable à fluorescence X (pXRF) peut être effectuée sur les échantillons après la préparation pour fournir des informations géochimiques en temps opportun et est idéalement associée aux données quantitatives de laboratoire. L’utilisation d’un échantillon séché et pulvérisé ou tamisé pour l’analyse pXRF produira un résultat plus représentatif, car la présence d’humidité dans les échantillons et l’inhomogénéité se sont avérées causer des problèmes pendant l’analyse pXRF.

EN SAVOIR PLUS

Sciage et photographie de base

ALS propose une large gamme de services de base, notamment la découpe, l’échantillonnage et la photographie. Une description des offres est fournie dans la section des services de base de cette page web.

EN SAVOIR PLUS

Accès Webtrieve au contrôle qualité interne d’ALS

Les vérifications de contrôle qualité internes de routine effectuées par ALS pour s’assurer que toutes les méthodes fonctionnent comme prévu peuvent être consultées dans Webtrieve™. Un compte Webtrieve™ peut être généré par notre groupe de services client avec l’autorisation appropriée de l’entreprise. Veuillez contacter votre représentant local du service client pour obtenir l’accès à Webtrieve™ ou recevoir le guide de l’utilisateur.

EN SAVOIR PLUS
 
v.1.1.1217