PM 2.5 and PM 10 refers to particular matter than is smaller than 2.5 and 10 micron respectively. ALS offer testing of these parameters for stack emission sampling
Particulate Target Analyte | Applicable Method |
---|---|
Total Suspendable Particulate (TSP) | M5, M5D, M17, M201A |
Particuclate Matter <10microns (PM <10) | M201A |
Particulate Matter <2.5microns (PM <2.5) | M201A |
Inorganic Condensible Particulate | M202, RM55 |
Organic Condensible Particulate | M202, RM55 |
All of these non-condensable particulate targets are determined gravimetrically, either from filter capture or acetone rinse residues. The capture of PM<2.5 and/or PM<10 is facilitated with the use of appropriately sized in-stack cyclones.
Condensable particulate are captured in impinger contents and determined by liquid/liquid extraction of the aqueous impinger content. Both the organic and aqueous phases of the extraction are determined as gravimetric residues. The aqueous residue is the inorganic condensable particulate and the organic residue is the organic condensable particulate.
Une variété de métaux peut être présente dans les émissions. Beaucoup d’entre eux peuvent avoir un impact négatif sur l’environnement et, par conséquent, une surveillance est nécessaire
PLUS D’INFORMATIONSALS propose un portefeuille complet d’équipements de test et d’échantillonnage pour les COSV dans les émissions.
PLUS D’INFORMATIONSLes composés inorganiques comme l’azote et le dioxyde de soufre sont des composés indésirables dans les émissions atmosphériques en raison de leur potentiel de contribution aux pluies acides.
PLUS D’INFORMATIONS